The small-sized CNC milling and engraving machine M-ROBO MS-43 for industrial purposes is designed to perform various milling, engraving, drilling, threading and contour machining on various surfaces of non-ferrous metals and their alloys.

The special feature of this machine is its compact size and ease of use. It has a vertical milling portal-type structure with a movable table. This design allows processing on flat and curved surfaces.

The M-ROBO MS-43 machine provides high precision and processing quality through the use of guides, ball screw gears and high-precision servo motors. At the same time, its protective cabinet fence ensures the safe operation of the operator.

The features of the machine also include its convenience when working in a confined space. The service area is only 2 m2 and is carried out on both sides, which allows you to install the machine near the wall.

This equipment has the ability to perform engraving operations on various materials, including carbon and stainless steels, heat-resistant titanium and aluminum alloys, plastics, textolite, stone and many others.

To ensure operator comfort and ease of operation, various additional functions are built into the machine. There is a window in the machine compartment for maintenance of moving mechanical parts and electric drives of the machine. In the lower part of the machine there is a technological compartment, which can be extended from the front side, in which a chip collection hopper is installed, a spindle cooling system, as well as the possibility of installing a compressor and a vacuum system. At the back of the machine there is an electric cabinet with an IP65 protection degree and a window for maintenance of the electric drive. 

The small-sized CNC milling and engraving machine M-ROBO MS-43 with cabinet fencing is a reliable and convenient equipment, ideal for performing serial operations for processing various materials with high accuracy and quality.

Technical specifications

• Load capacity – 5 kg;
• The number of bins is 1 (2) pcs.;
• The number of blanks in the hopper is 100 (200) pieces with maximum dimensions D=50 mm L =100 mm;
• The change time of the workpiece is 14 seconds;
• Type of transmission along the horizontal axis: linear electric drive LDB-110-1600;
• Transmission type along the vertical axis: linear electric drive LDB-80-1400;
• Hopper transmission type: linear electric drive LDB-80-600;
• The maximum travel speed is 250 mm/sec;
• The type of grip is pneumatic with parallel jaws;
• The rotation of the grip is 360 degrees;
• The positioning accuracy is 0.05 mm by 300 mm;
• The repeatability of positioning is 0.12 mm by 300 mm;
• The discreteness of the displacement setting (the minimum displacement that can be set in the control program) is 0.001 mm;
• CNC CONTROL 3X system;
• The management interface is an industrial computer running Windows;
• Computer interface – USB;
• Supported file formats are G-code, M-code (ISO);
• Supply voltage – 220 V, 50 Hz;
• The maximum power consumption is 3.0 kW;
• Overall dimensions of the DShV – 2100x1100x2100 mm;
• Weight – 180 kg.

The scope of delivery

1. RT-1 manipulator robot;

2. A set of connecting wires;

3. A set of clamps for fixing;

4. Manual and operating data sheet.